Fluke's Hart Scientific division makes everything you need for calibrating thermometers including SPRTs, PRTs, thermistors, and thermocouples. Our temperature baths and dry-wells offer unmatched stability and our primary standards are used in metrology labs around the world. For precision thermometry, our thermometer readouts and probes are exceptionally accurate and easy to use.

Fluke 743B Documenting Process Calibrator

The 743B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.
For documentation, the 743B automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.

Includes:

• BC7217 battery charger
• BP7217 battery pack
• DPC/TRACK Sample Software
• Instruction manual
• One set of TP220 test probes
• Serial port cable
• Two sets of AC220 test clips
• Two sets of TL224 industrial test leads
• NIST-traceable Calibration Report and Data
  

Fluke 724

Fluke 724 Temperature Calibrator

The new Fluke 724: everything you need to troubleshoot and calibrate temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant. The Fluke 724 is the master’s answer to temperature calibration. The Fluke 724 can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms. The Fluke 724 even handles high-speed pulsed RTD circuits and provides loop power. The dual line measure/source display lets you source temperature and view loop current at the same time. With its simple, “no menus” controls, the Fluke 724 is easy to operate, too.

• Now you can carry one tool to expertly test all the temperature sensors
  and transmitters in your plant.
• The Fluke 724 can measure and source 10 thermocouple types
  and 7 RTD types, plus volts and ohms.
• The Fluke 724 even handles high-speed pulsed RTD circuits
  and provides loop power.
• The dual line measure/source display lets you source temperature
  and view loop current at the same time.
• With its simple, “no menus” controls, the Fluke 724 is easy to operate, too.

Fluke 712

Fluke 712 RTD Process Calibrator

The Fluke 712 RTD temperature calibrator delivers outstanding performance, durability and reliability. The 712 calibrator is a compact, lightweight, and easy to carry tool. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 712 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.

• Measure temperature from RTD output
• Simulate RTD output
• Operates with seven types of RTDs
• Measure additional RTDs using Ohms measurement function
• Simulate additional RTDs using Ohms source function
• ºF or ºC selectable
• Four shrouded banana jacks
• Compatible with Rosemount® pulsed RTD transmitters (pulses > 10ms)
• Holster features test lead storage
• Compatible with toolpack magnetic hanging system

Fluke 714

Fluke 714 Thermocouple Calibrator

The Fluke 714 Thermocouple Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 714 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.

• Measure temperature from TC output
• Simulate TC output
• Operable with nine types of thermocouples
• Calibrate linear TC transmitter with mV source function
• Selectable ºF or ºC
• Thermocouple mini-jack termination
• Available as accessories: Fluke-700TC1 and TC2 Thermocouple Mini-plug Kits
• Holster features test lead storage
• Compatible with toolpack magnetic hanging system
  

Fluke 983 Particle Counter

Take a new look at indoor air quality

The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 983 is the portable solution for determining airborne particle concentrations. Use the Fluke 983 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

• With the Fluke 983, you can: Measure filter efficiency
• Monitor industrial cleanrooms
• Pre-screen indoor air quality and confidently work with IAQ specialists
• Locate particle sources for remediation
• Report the effectiveness of repairs to customers

Drive additional business by demonstrating the need for maintenance and repair with expanded
data logging and six-channel particle size display, the Fluke 983 allows users to run more tests
quickly, with less time spent cycling through screens to obtain the data. The Fluke 983 is lightweight
and easy to use in any position, with a comfortable hand strap and rugged rubber holster.

Flike 51, 52, 53, 54

Fluke 50 Series II Thermometers

Fluke 51 II Single Input type J,K,T, and E thermocouples.
Fluke 52 II Dual Input type J,K,T, and E thermocouples.
Fluke 53 II Single Input type J,K,T,E,N,R, and S thermocouples. Includes datalogging capabilities.
Fluke 54 II Dual Input type J,K,T,E,N,R, and S thermocouples. Includes datalogging capabilities.

Products Features FLUKE 51 Series II and 52 Series II:

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy.
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• 3 year warranty
  

The Fluke 53 Series II and 54 Series II include all the features listed above plus:

• Large backlit dual display shows any combination of T1, T2 (52 and 54 only),
  T1-T2 (52 and 54 only), plus MIN, MAX, or AVG.
• Additional thermocouple types R, S, and N (for a total of 7 different types)
• Recall function allows logged data to be easily reviewed on the meter display
• IR communication port allows data to be exported to optional FlukeView Forms®
• Temperature PC software for further analysis and graphing
• Data Logging up to 500 points of data with user adjustable recording interval

Fluke 430 Series Three-Phase Power Quality Analyzers

Pinpoint power quality problems faster, safer and in greater detail.

The Fluke 434 and 433 three-phase power quality analyzers help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use handheld tools have many innovative features to give you the details to pinpoint problems faster and safer.

• Complete three-phase troubleshooting tool: measures virtually every power system
  parameter : voltage, current, frequency, power, power consumption (energy), unbalance
  and flicker, harmonics and inter-harmonics.
• Captures events like dips and swells, transients, interruptions and rapid voltage changes.
• AutoTrend: no time wasted setting up additional trend graphs while every measurement
  is automatically recorded. Analyzes trends using cursors and zoom function while recording
  continues in the background.
• System-Monitor: gives immediate insight into power system’s quality.
• Checks conformity to limits specified in EN50160 or to own custom limits.
• Four channels: simultaneously measures voltage and current on all three phases and neutral.
• Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically.
• Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for
  measurements at the service entrance.
• Rugged, handheld instrument operates for more than 7 hours on included rechargeable
  NiMH battery pack. Menu-driven interface simplifies operation.
• Extensive data analysis possibilities. Cursors and zoom can be used ‘live’ while taking
  the measurements, or ‘off-line’ on stored measurement data. The stored measurements
  can also be transferred to a PC with FlukeView software (included with Fluke 434).
• Complete package includes everything to get started: 4 current clamps, 5 voltages
  test leads and clips, line adapter/battery charger and hard case.
• Complies with IEC 61000-4-30 measurement standards.