Manufacturer of Custom Temperature Sensors


Temperature & Pressure Solutions Made Easy
Phone: 858-573-0983 Fax: 858-573-0623
Email: sales@thermx.com
Home Page
About Us
Industries Served
Catalog Request
Contact Us

Available Products

Air Probes
Alumina Tubes
Carbon Dioxide
CO2 Transmitters
CO2 Handhelds
Calibration Dry Wells Calibration Baths
Cement 0n Thermocouple
Ceramic Tubes
Chart Recorders
Connectors
Controllers
Data Loggers
Digital Thermometers
Extension Wire
Field Metrology Wells
Flowmeters
Flow Calibrators
Heaters
Humidity Handhelds
Humidity Sensors
Humidity Transmitters
Indicators
Infrared Pyrometers
Mulite Tubes
Multipoint Thermocouples
Panel Jacks
Partlow Recorders
Pressure Calibrators
Pressure Transducers
Pressure Transmitters
Protection Heads
Protection Tubes
Probes
%RH Probes
RTDs
RTD Probes
Solid State Relay
SSR
Surface Probes
Temperature Baths
Temperature Calibrators
Temperature Transmitters
Thermometers
Thermocouples
Thermocouple Probes Thermocouple Scanner
Thermocouple Strip Panel
Thermocouple Wire
Thermistors
Thermistor Probes
Thermowells
Wire and Cable
WIKA Pressure Transmitters
Validation Thermocouples

Thermal Validation Thermocouple Sensors

ThermX Southwest is a manufacturer of thermal validation thermocouple sensors. ThermX uses a high accuracy FEP Teflon
(200 °C) insulated, 22 AWG 7-strand conductor, ( ±0.3 °C at 121 °C ), type "T" thermocouple wire. Each 1000 foot spool
is calibrated at 121 °C from samples taken from the top and bottom of each spool to ensure quality and accuracy. These thermocouples are supplied in custom lengths with welded and Teflon capped tips. They are available with stripped ends or standard size connectors for quick disconnect. The finished thermocouples are tagged according to customer specification.

Teflon Insulated
Ordering Guide
Ideal for Autoclaves

Available With or Without Connector.

Kapton Insulated
Ordering Guide
Ideal for Dry Ovens

Available With High Temperature Connector.

In addition, ThermX Southwest also offers a 28 AWG 7-strand conductor, Special Limits Error type "T" thermocouple with FEP Teflon (200 °C) insulation. Also available is a Kapton insulated 22 AWG 7-strand conductor, Special Limits Error type "T" thermocouple for use in dry ovens to 350 °C. These wires are offered with Special Limits Error conductor which is ± 0.5 °C or 0.4% of reading, which ever is greater.

For additional information or a sample probe, please contact ThermX Southwest at 1-800- 284-3769.

Quick turn around on custom probes.

Home